Origin

Netherlands

 OUR Swivel joints have been used in the processing industry for a long time. The use of swivel joints in metal loading arms became critical because of the extraordinarily high bending and axial load combination, due to the reach of the loading arm and wind forces. OUR swivel joints are developed to withstand all these loads without leaking. In fact, leakage and regular maintenance is something which is unknown with OUR swivel joints

   Carbon steel

Low Temperature Carbon Steel

Stainless steel

Carbon Steel with PTFE, rubber and other linings

Hastelloy

Titanium

Plastics

Temperature range of -200°C up to 300°C

Pressure range up to 120 bar

Sizes from 1” up to 24”. 

Specific features:

Swivel joints can withstand much higher loads than conventional designs due to the special shape of the ball races in combination with relatively large diameter ball bearings

The ball race chamber is completely separated from the sealing part

The product seal can be replaced without removing the ball bearings

Swivel joints are provided with long life lubrication, so there is no need for regular maintenance

Double or single ball race depending on application

Jacketing and trace heating option

Full size bore

Tell tale leakage indicator

Types & Purposes:

1. SAN831 Multi Purpose, up to 4”

2. SAN812 Multi Purpose, from 6” up to 24”

3. SAC817 for Cryogenic Purposes

4. SRL825 for Corrosive Purposes (PTFE lined execution)

5. SRS822 for Toxic Purposes

6. SAL835 Low Height Execution